Depending on the type or thickness of the material you sew, the seams may be too loose or too tight even when the tensions are correctly adjusted. In these cases, you can easily adjust the cutting width with this dial to correct the seam tension.  There’s no need to change the needle plate for rolled hemming. Just slide the needle plate setting knob to “R” position to convert the plate for rolled hemming.  The differential feed device is designed to prevent fabrics from puckering or stretching. Both stitch length and differential feed dials can be set at any time, even while sewing.


  • Presser foot pressure adjustment
  • Cutting width: 3.1 mm – 7.3 mm
  • Stitch length: 1 – 4 mm
  • Differential feed ratio: 0.5 – 2.25
  • Easy 2-step upper knife engagement
  • Instant rolled hem conversion with chaining finger
  • Built-in thread cutter
  • Colour-coded threading path with diagram
  • 3/4 thread overlocking
  • 4 bonus attachments
  • Instructional DVD

Standard Accessories

  • Presser Foot (on machine)
  • Pack of needles (HAx1SP)
  • Spool Holders x 4
  • Screwdriver (Lge)
  • Screwdriver (Sml)
  • Tweezers
  • Blind Stitch Foot (Bonus)
  • Gathering Attachment (Bonus)
  • Elastic Gathering Attachment (Bonus)
  • Cording Foot (Bonus)
  • Foot Control
  • Instruction Book
  • Instructional DVD